Solution à l'erreur Windows Update 0X80070463

Microsoft‘un Janvier-février 2024de Patch Tuesday Opérations de correctifs publiées à l'époque WinRE Cela a nécessité de nombreux changements côté partition.

Premier CVE-2024-20666 Vulnérabi de contournement de la fonctionnalité de sécurité BitLockerlity Avec la mise à jour publiée, les administrateurs système ont commencé à en parler.

Détaillant la mise à jour Windows KB5034441

Windows Un attaquant ayant un accès physique aux plateformes BitLocker Une grave faille de sécurité a été détectée qui permet l'accès aux données cryptées. Cette vulnérabilité CVE-2024-20666 Il est défini et affecte potentiellement les systèmes Windows 10, Windows 11 et Windows Server 2022.

Microsofta publié une mise à jour le 9 janvier 2024 pour corriger cette vulnérabilité. Cependant, cette mise à jour se heurte à quelques problèmes techniques. La mise à jour se produit automatiquement, que BitLocker soit activé ou non sur un système. Windows Update Il est distribué à travers.

Pour que la mise à jour soit installée avec succès, il doit y avoir au moins 250 Mo d'espace libre dans la partition de récupération des systèmes.

Si WinRE S'il n'y a pas assez d'espace libre sur la partition, lors de la mise à jour 0x80070643 – ERREUR_INSTALL_FAILURE L'échec peut survenir en raison d'erreurs. Dans ce cas, pour que la mise à jour se déroule correctement, les utilisateurs doivent fournir l'espace nécessaire dans la partition WinRE ou prendre les dispositions spécifiées par les administrateurs système.

Winre Extend manuellement le processus pour l'erreur de mise à jour 0x80070643

Pour l'erreur 5034441x0 lors du processus Windows Update KB80070643, WinRE Partition Extend sur le serveur doit être effectué.

Pour résoudre le problème de contournement de la fonctionnalité de sécurité BitLocker sous Windows, la partition WinRE de 250 Mo requise doit être redimensionnée.

  • YOuvrez l'invite de commande en tant qu'administrateur :
    • Ouvrez une fenêtre CMD en tant qu'administrateur.
  • Vérifiez l'état de WinRE :
    • reagentc /info en exécutant la commande WinREVérifiez s'il est installé. S'il est installé, WinREVous verrez le chemin du répertoire de .
  • Désactivez WinRE :
    • reagentc /disable Désactivez temporairement WinRE avec la commande.
  • Réduire la partition du système d'exploitation :
    • Pour la gestion des disques diskpart exécutez la commande.
    • list disk Utilisez pour lister les disques et sélectionner le disque sur lequel se trouve votre système d'exploitation. select disk <disk numarası> Sélectionnez avec .
    • list partition Utilisez pour répertorier les partitions et sélectionner la partition du système d'exploitation. select partition <partition numarası> Sélectionnez avec .
    • système opérateur shrink desired=250 minimum=250 Réduisez-le de 250 Mo avec la commande.
  • Suppression de la partition WinRE :
    • Partition WinRE select partition <WinRE bölüm numarası> ve delete partition override Supprimer avec des commandes.
  • Création d'une nouvelle partition de récupération :
    • Le disque est GPT ou MBR list disk Vérifiez avec la commande. S'il s'agit de GPT, create partition primary id=de94bba4-06d1-4d40-a16a-bfd50179d6ac commande, MBR create partition primary id=27 Utilisez la commande.
    • nouvel épisode format quick fs=ntfs label="Windows RE tools" Formatage rapide avec .
  • Réactivation de WinRE :
    • reagentc /enable Réactivez WinRE avec la commande et reagentc /info Vérifiez que l'installation a réussi avec .
  • Quitter Diskpart :
    • exit Quittez l'application diskpart avec la commande.

WinRE étendre le processus avec PowerShell

Extension de partition WinRE doit être utilisé pour le processus scénario Je partage le lien et le blog de code ci-dessous.

  • PowerShell doit être exécuté en tant qu'administrateur
  • Nous devons exécuter le script PowerShell que vous avez téléchargé.
  • Avant de démarrer le processus d'extension WinRE et vous demande de saisir le nom du lecteur et du dossier à sauvegarder.
  • Ensuite, toutes les étapes se déroulent automatiquement lorsque le script cesse de s'exécuter, la partition WinRE sera étendue à 250 Mo.

KB5034957 : mise à jour de la partition WinRE sur les appareils déployés pour résoudre les vulnérabilités de sécurité dans CVE-2024-20666 – Support Microsoft

Param (
[Parameter(Mandatory=$false,HelpMessage="Skip confirmation")][bool]$SkipConfirmation=$false,
[Parameter(Mandatory=$true,HelpMessage="Path to backup old WinRE partition content to")][string]$BackupFolder
)
# ------------------------------------
# Helper functions
# ------------------------------------
# Log message
function LogMessage([string]$message)
{
	$message = "$message"
	Write-Host $message
}
# Extract numbers from string
function ExtractNumbers([string]$str)
{
	$cleanString = $str -replace "[^0-9]"
	return [long]$cleanString
}
# Display partition info using fsutil
# Return an array, the first value is total size and the second value is free space
function DisplayPartitionInfo([string[]]$partitionPath)
{
	$volume = Get-WmiObject -Class Win32_Volume | Where-Object { $partitionPath -contains $_.DeviceID }
	LogMessage("  Partition capacity: " +  $volume.Capacity)
	LogMessage("  Partition free space: " + $volume.FreeSpace)
	return $volume.Capacity, $volume.FreeSpace
} 
# Display WinRE status
function DisplayWinREStatus()
{
	# Get WinRE partition info
	$WinREInfo = Reagentc /info
	foreach ($line in $WinREInfo)
	{
		$params = $line.Split(':')
		if ($params.Count -lt 2)
		{
			continue
		}
		if (($params[1].Trim() -ieq "Enabled") -Or (($params[1].Trim() -ieq "Disabled")))
		{
			$Status = $params[1].Trim() -ieq "Enabled"
			LogMessage($line.Trim())
		}
		if ($params[1].Trim() -like "\\?\GLOBALROOT*")
		{
			$Location = $params[1].Trim()
			LogMessage($line.Trim())
		}
	}
	
	return $Status, $Location
}
# ------------------------------------
# Main execution
# ------------------------------------
# Clear the error
$Error.Clear()
# ------------------------------------
# Examining the system to collect required info 
# for the execution
# Need to check WinRE status, collect OS and WinRE
# partition info
# ------------------------------------
LogMessage("Start time: $([DateTime]::Now)")
LogMessage("Examining the system...")
$NeedShrink = $true
$NeedCreateNew = $false
$NeedBackup = $false
# Get WinRE partition info
$InitialWinREStatus = DisplayWinREStatus
$WinREStatus = $InitialWinREStatus[0]
$WinRELocation = $InitialWinREStatus[1]
if (!$WinREStatus)
{
	LogMessage("Error: WinRE Disabled")
	exit 1
}
# Get System directory and ReAgent xml file
$system32Path = [System.Environment]::SystemDirectory
LogMessage("System directory: " + $system32Path)
$ReAgentXmlPath = Join-Path -Path $system32Path -ChildPath "\Recovery\ReAgent.xml"
LogMessage("ReAgent xml: " + $ReAgentXmlPath)
if (!(Test-Path  $ReAgentXmlPath))
{
	LogMessage("Error: ReAgent.xml cannot be found")
	exit 1
}
# Get OS partition
LogMessage("")
LogMessage("Collecting OS and WinRE partition info...")
$OSDrive = $system32Path.Substring(0,1)
$OSPartition = Get-Partition -DriveLetter $OSDrive
# Get WinRE partition
$WinRELocationItems = $WinRELocation.Split('\\')
foreach ($item in $WinRELocationItems)
{
    if ($item -like "harddisk*")
	{
		$OSDiskIndex = ExtractNumbers($item)
	}
	if ($item -like "partition*")
	{
		$WinREPartitionIndex = ExtractNumbers($item)
	}
}
LogMessage("OS Disk: " + $OSDiskIndex)
LogMessage("OS Partition: " + $OSPartition.PartitionNumber)
LogMessage("WinRE Partition: " + $WinREPartitionIndex)
$WinREPartition = Get-Partition -DiskNumber $OSDiskIndex -PartitionNumber $WinREPartitionIndex
$diskInfo = Get-Disk -number $OSDiskIndex
$diskType = $diskInfo.PartitionStyle
LogMessage("Disk PartitionStyle: " + $diskType)
# Display WinRE partition size info
LogMessage("WinRE partition size info")
$WinREPartitionSizeInfo = DisplayPartitionInfo($WinREPartition.AccessPaths)
LogMessage("WinRE Partition Offset: " + $WinREPartition.Offset)
LogMessage("WinRE Partition Type: " + $WinREPartition.Type)
LogMessage("OS partition size: " + $OSPartition.Size)
LogMessage("OS partition Offset: " + $OSPartition.Offset)
$OSPartitionEnds = $OSPartition.Offset + $OSPartition.Size
LogMessage("OS partition ends at: " + $OSPartitionEnds)
LogMessage("WinRE partition starts at: " + $WinREPartition.Offset)
$WinREIsOnSystemPartition = $false
if ($diskType -ieq "MBR")
{
	if ($WinREPartition.IsActive)
	{
		LogMessage("WinRE is on System partition")
		$WinREIsOnSystemPartition = $true
	}
}
if ($diskType -ieq "GPT")
{
	if ($WinREPartition.Type -ieq "System")
	{
		LogMessage("WinRE is on System partition")
		$WinREIsOnSystemPartition = $true
	}
}
# Checking the BackupFolder parameter
if ($PSBoundParameters.ContainsKey('BackupFolder'))
{
	LogMessage("")
	LogMessage("Backup Directory: [" + $BackupFolder + "]")
	
	$Needbackup = $true
	
	if ($WinREIsOnSystemPartition)
	{
		$Needbackup = $false
		LogMessage("WinRE is on System partition which will be preserved. No need to backup content")
	}
	else
	{
		if (Test-path $BackupFolder)
		{
			$items = Get-ChildItem -Path $BackupFolder
			if ($items)
			{
				LogMessage("Error: Existing backup directory is not empty")
				exit 1
			}
		}
		else
		{
			LogMessage("Creating backup directory...")
			try 
			{
				$item = New-Item -Path $BackupFolder -ItemType Directory -ErrorAction Stop
				if ($item)
				{
					LogMessage("Backup directory created")
				}
				else
				{
					LogMessage("Error: Failed to create backup directory [" + $BackupFolder + "]")
					exit 1
				}
			} catch 
			{
				LogMessage("Error: An error occurred: $_")
				exit 1
			}
		}
	}
}
# ------------------------------------
# Verify whether we meet requirements of execution
# - WinRE cannot be on OS partition for the extension
# - WinRE partition must be the next partition after OS partition
# - If WinRE partition already have >=250MB free space, no need to do repartition
# - If there is enough unallocated space to grow the WinRE partition size, skip shrinking OS
# 
# However, if the WinRE partition is before the OS partition, there is no chance to extend it
# As a result, it's better to create a new WinRE partition after the OS partition
# ------------------------------------
# Perform a few checks
LogMessage("")
LogMessage("Verifying if the WinRE partition needs to be extended or not...")
if (!(($diskType -ieq "MBR") -Or ($diskType -ieq "GPT")))
{
	LogMessage("Error: Got an unexpected disk partition style: " +$diskType)
	exit 1
}
# WinRE partition must be after OS partition for the repartition
if ($WinREPartitionIndex -eq $OSPartition.PartitionNumber)
{
	LogMessage("WinRE and OS are on the same partition, should not perform extension")
	exit 0
}
$supportedSize = Get-PartitionSupportedSize -DriveLetter $OSDrive
# if there is enough free space, skip extension
if ($WinREPartitionSizeInfo[1] -ge 250MB)
{
	LogMessage("More than 250 MB of free space was detected in the WinRE partition, there is no need to extend the partition")
	exit 0
}
if ($WinREPartition.Offset -lt $OSPartitionEnds)
{
	LogMessage("WinRE partition is not after OS partition, cannot perform extension")
	LogMessage("Need to create a new WinRE partition after OS partition")
	$NeedCreateNew = $true
	$NeedShrink = $true
	
	# Calculate the size of repartition
	# Will create a new WinRE partition with current WinRE partition size + 250 MB
	# The OS partition size will be shrunk by the new WinRE partition size
	$targetWinREPartitionSize = $WinREPartitionSizeInfo[0] + 250MB
	$shrinkSize = [Math]::Ceiling($targetWinREPartitionSize / 1MB) * 1MB
	$targetOSPartitionSize = $OSPartition.Size - $shrinkSize
	if ($targetOSPartitionSize -lt $supportedSize.SizeMin)
	{
		LogMessage("Error: The target OS partition size after shrinking is smaller than the supported minimum size, cannot perform the repartition")
		exit 1
	}
}
else
{
	if ($WinREIsOnSystemPartition)
	{
		LogMessage("WinRE parititon is after the OS partition and it's also System partition")
		LogMessage("Error: Got unexpected disk layout, cannot proceed")
		exit 1
	}
	if (!($WinREPartitionIndex -eq ($OSPartition.PartitionNumber + 1)))
	{
		LogMessage("Error: WinRE partition is not right after the OS partition, cannot extend WinRE partition")
		exit 1
	}
	# Calculate the size of repartition
	# Will shrink OS partitition by 250 MB
	$shrinkSize = 250MB
	$targetOSPartitionSize = $OSPartition.Size - $shrinkSize
	$targetWinREPartitionSize = $WinREPartitionSizeInfo[0] + 250MB
	$UnallocatedSpace = $WinREPartition.Offset - $OSPartitionEnds;
	# If there is unallocated space, consider using it
	if ($UnallocatedSpace -ge 250MB)
	{
		$UnallocatedSpace = $WinREPartition.Offset - $OSPartitionEnds;
		LogMessage("Found unallocated space between OS and WinRE partition: " + $UnallocatedSpace)
		LogMessage("There is already enough space to extend WinRE partition without shrinking the OS partition")
		$NeedShrink = $false
		$targetOSPartitionSize = 0
	}
	else
	{
		$shrinkSize = [Math]::Ceiling((250MB - $UnallocatedSpace)/ 1MB) * 1MB
		if ($shrinkSize > 250MB)
		{
			$shrinkSize = 250MB
		}
		$targetOSPartitionSize = $OSPartition.Size - $shrinkSize
		if ($targetOSPartitionSize -lt $supportedSize.SizeMin)
		{
			LogMessage("Error: The target OS partition size after shrinking is smaller than the supported minimum size, cannot perform the repartition")
			exit 1
		}
	}
}
# ------------------------------------
# Report execution plan and ask for user confirmation to continue
# ------------------------------------
# Report the changes planned to be executed, waiting for user confirmation
LogMessage("")
LogMessage("Summary of proposed changes")
if ($NeedCreateNew)
{
	LogMessage("Note: WinRE partition is before OS partition, need to create a new WinRE partition after OS partition")
	LogMessage("Will shrink OS partition by " + $shrinkSize)
	LogMessage("  Current OS partition size: " + $OSPartition.Size)
	LogMessage("  Target OS partition size after shrinking: " + $targetOSPartitionSize)
	LogMessage("New WinRE partition will be created with size: ", $targetWinREPartitionSize)
	if ($WinREIsOnSystemPartition)
	{
		LogMessage("Existing WinRE partition is also system partition, it will be preserved")
	}
	else
	{
		LogMessage("Existing WinRE partition will be deleted")
		LogMessage("  WinRE partition: Disk [" + $OSDiskIndex + "] Partition [" + $WinREPartitionIndex + "]")
		LogMessage("  Current WinRE partition size: " + $WinREPartitionSizeInfo[0])
	}
}
else
{
	if ($NeedShrink)
	{
		LogMessage("Will shrink OS partition by " + $shrinkSize)
		LogMessage("  Current OS partition size: " + $OSPartition.Size)
		LogMessage("  Target OS partition size after shrinking: " + $targetOSPartitionSize)
		if ($UnallocatedSpace -ge 0)
		{
			LogMessage("Unallocated space between OS and WinRE partition that will be used towards the new WinRE partition: " + $UnallocatedSpace)
		}
	}
	else
	{
		LogMessage("Will use 250MB from unallocated space between OS and WinRE partition")
	}
	LogMessage("Will extend WinRE partition size by 250MB")
	LogMessage("  WinRE partition: Disk [" + $OSDiskIndex + "] Partition [" + $WinREPartitionIndex + "]")
	LogMessage("  Current WinRE partition size: " + $WinREPartitionSizeInfo[0])
	LogMessage("  New WinRE partition size:     " + $targetWinREPartitionSize)
	LogMessage("WinRE will be temporarily disabled before extending the WinRE partition and enabled automatically in the end")
	if ($UnallocatedSpace -ge 100MB)
	{
		LogMessage("Warning: More than 100MB of unallocated space was detected between the OS and WinRE partitions")
		LogMessage("Would you like to proceed by using the unallocated space between the OS and the WinRE partitions?")
	}
}
if ($Needbackup)
{
	LogMessage("")
	LogMessage("The contents of the old WinRE partition will be backed up to [" + $BackupFolder + "]")
}
LogMessage("")
LogMessage("Please reboot the device before running this script to ensure any pending partition actions are finalized")
LogMessage("")
if ($SkipConfirmation)
{
	LogMessage("User chose to skip confirmation")
	LogMessage("Proceeding with changes...")
}
else
{
	$userInput = Read-Host -Prompt "Would you like to proceed? Y for Yes and N for No"
		
	if ($userInput -ieq "Y")
	{
		LogMessage("Proceeding with changes...")
	}
	elseif ($userInput -ieq "N")
	{
		LogMessage("Canceling based on user request, no changes were made to the system")
		exit 0
	}
	else
	{
		LogMessage("Error: Unexpected user input: [" + $userInput + "]") 
		exit 0
	}
}
LogMessage("")
LogMessage("Note: To prevent unexpected results, please do not interrupt the execution or restart your system")
# ------------------------------------
# Do the actual execution
# The main flow is:
# 1. Check whether ReAgent.xml has stage location and clear it for repartiion
# 2. Disable WinRE as WinRE partition will be deleted
# 3. Perform the repartition to create a larger WinRE partition
# 4. Re-enable WinRE
# ------------------------------------
LogMessage("")
# Load ReAgent.xml to clear Stage location
LogMessage("Loading [" + $ReAgentXmlPath + "] ...")
$xml = [xml](Get-Content -Path $ReAgentXmlPath)
$node = $xml.WindowsRE.ImageLocation
if (($node.path -eq "") -And ($node.guid -eq "{00000000-0000-0000-0000-000000000000}") -And ($node.offset -eq "0") -And ($node.id -eq "0"))
{
	LogMessage("Stage location info is empty")
}
else
{
	LogMessage("Clearing stage location info...")
	$node.path = ""
	$node.offset = "0"
	$node.guid= "{00000000-0000-0000-0000-000000000000}"
	$node.id="0"
	# Save the change
	LogMessage("Saving changes to [" + $ReAgentXmlPath + "]...")
	$xml.Save($ReAgentXmlPath)
}
# Disable WinRE
LogMessage("Disabling WinRE...")
reagentc /disable
if (!($LASTEXITCODE -eq 0))
{
	LogMessage("Warning: encountered an error when disabling WinRE: " + $LASTEXITCODE)
	exit $LASTEXITCODE
}
# Verify WinRE is under C:\Windows\System32\Recovery\WinRE.wim
$disableWinREPath = Join-Path -Path $system32Path -ChildPath "\Recovery\WinRE.wim"
LogMessage("Verifying that WinRE wim exists in downlevel at default location")
if (!(Test-Path $disableWinREPath))
{
	LogMessage("Error: Cannot find " + $disableWinREPath)
	
	# Re-enable WinRE
	LogMessage("Re-enabling WinRE on error...")
	reagentc /enable
	if (!($LASTEXITCODE -eq 0))
	{
		LogMessage("Warning: encountered an error when enabling WinRE: " + $LASTEXITCODE)
	}
	exit 1
}
# ------------------------------------
# Perform the repartition
# 1. Resize the OS partition
# 2. Delete the WinRE partition
# 3. Create a new WinRE partition
# ------------------------------------
LogMessage("Performing repartition to extend the WinRE partition ...")
# 1. Resize the OS partition
if ($NeedShrink)
{
	LogMessage("Shrinking the OS partition to create a larger WinRE partition")
	LogMessage("Resizing the OS partition to: [" + $targetOSPartitionSize + "]...")
	Resize-Partition -DriveLetter $OSDrive -Size $targetOSPartitionSize
	if ($Error.Count -gt 0) {
		LogMessage("Error: Resize-Partition encountered errors: " + $Error[0].Exception.Message)
		
		# Re-enable WinRE
		LogMessage("Re-enabling WinRE on error...")
		reagentc /enable
		if (!($LASTEXITCODE -eq 0))
		{
			LogMessage("Warning: encountered an error when enabling WinRE: " + $LASTEXITCODE)
		}
		exit 1
	}
	$OSPartitionAfterShrink = Get-Partition -DriveLetter $OSDrive
	LogMessage("Target partition size: " + $targetOSPartitionSize)
	LogMessage("Size of OS partition after shrinking: " + $OSPartitionAfterShrink.Size)
}
# 2. Delete the WinRE partition
LogMessage("")
if ($WinREIsOnSystemPartition)
{
	LogMessage("Existing WinRE partition is System partition, skipping deletion")
}
else
{	
	# If requested by user, backup rest of the content on WinRE partition to backup directory
	if ($Needbackup)
	{
		$sourcePath = $WinREPartition.AccessPaths[0] 
		LogMessage("Copying content on WinRE partition from [" + $sourcePath + "] to [" + $BackupFolder + "]...")
		
		# Copy-Item may have access issue with certain system folders, enumerate the children items and exlcude them
		$items = Get-ChildItem -LiteralPath $sourcePath -Force
		foreach ($item in $items)
		{
			if ($item.Name -ieq "System Volume Information")
			{
				continue
			}
			$sourceItemPath = Join-Path -Path $sourcePath -ChildPath $item.Name
			$destItemPath = Join-Path -Path $BackupFolder -ChildPath $item.Name
			try 
			{
				LogMessage("Copying [" + $sourceItemPath + "] to [" + $destItemPath + "]...")
				Copy-Item -LiteralPath $sourceItemPath -Destination $destItemPath -Recurse -Force
			} catch 
			{
				LogMessage("Error: An error occurred during copy: $_")
				exit 1
			}
		}
		
		LogMessage("Backup completed")
		LogMessage("")
	}
	LogMessage("Deleting WinRE partition: Disk [" + $OSDiskIndex + "] Partition [" + $WinREPartitionIndex + "]...")
	Remove-Partition -DiskNumber $OSDiskIndex -PartitionNumber $WinREPartitionIndex -Confirm:$false
	if ($Error.Count -gt 0) {
		LogMessage("Error: Remove-Partition encountered errors: " + $Error[0].Exception.Message)
		exit 1
	}
}
# A short sleep for the partition change
Sleep 5
# 3. Create a new WinRE partition
LogMessage("")
LogMessage("Creating new WinRE partition...")
LogMessage("Target size: " + $targetWinREPartitionSize)
if ($diskType -ieq "GPT")
{
	$partition = New-Partition -DiskNumber $OSDiskIndex -Size $targetWinREPartitionSize -GptType "{de94bba4-06d1-4d40-a16a-bfd50179d6ac}"
	
	$newPartitionIndex = $partition.PartitionNumber
	# A short sleep to make sure the partition is ready for formatting
	Sleep 2
	LogMessage("Formating the partition...")
	$result = Format-Volume -Partition $partition -FileSystem NTFS -Confirm:$false
	if ($Error.Count -gt 0) {
		LogMessage("Error: Format-Volume encountered errors: " + $Error[0].Exception.Message)
		exit 1
	}
}
else
{
	#$partition = New-Partition -DiskNumber $OSDiskIndex -Size $targetWinREPartitionSize -MbrType 0x27
	$targetWinREPartitionSizeInMb = [int]($targetWinREPartitionSize/1MB)
	$diskpartScript = 
@"
select disk $OSDiskIndex
create partition primary size=$targetWinREPartitionSizeInMb id=27
format quick fs=ntfs label="Recovery"
set id=27
"@
	$TempPath = $env:Temp
	$diskpartSciptFile = Join-Path -Path $TempPath -ChildPath "\ExtendWinRE_MBR_PowershellScript.txt"
	
	LogMessage("Creating temporary diskpart script to create Recovery partition on MBR disk...")
	LogMessage("Temporary diskpart script file: " + $diskpartSciptFile)
	$diskpartScript | Out-File -FilePath $diskpartSciptFile -Encoding ascii
	
	LogMessage("Executing diskpart script...")
	try 
	{
		$diskpartOutput = diskpart /s $diskpartSciptFile
		
		if ($diskpartOutput -match "DiskPart successfully") 
		{
			LogMessage("Diskpart script executed successfully")
		}
		else
		{
			LogMessage("Error executing diskpart script:" + $diskpartOutput)
			exit 1
		}
		LogMessage("Deleting temporary diskpart script file...")
		Remove-Item $diskpartSciptFile
	}
	catch 
	{
		LogMessage("Error executing diskpart script: $_")
		exit 1
	}
	
	$vol = Get-Volume -FileSystemLabel "Recovery"
	$newPartitionIndex = (Get-Partition | Where-Object { $_.AccessPaths -contains $vol.Path } ).PartitionNumber
}
if ($Error.Count -gt 0) 
{
	LogMessage("Error: New-Partition encountered errors: " + $Error[0].Exception.Message)
	exit 1
}
LogMessage("New Partition index: " + $newPartitionIndex)
# Re-enable WinRE
LogMessage("Re-enabling WinRE...")
reagentc /enable
if (!($LASTEXITCODE -eq 0))
{
	LogMessage("Warning: encountered an error when enabling WinRE: " + $LASTEXITCODE)
	exit $LASTEXITCODE
}
# In the end, Display WinRE status to verify WinRE is enabled correctly
LogMessage("")
LogMessage("WinRE Information:")
$FinalWinREStatus = DisplayWinREStatus
$WinREStatus = $FinalWinREStatus[0]
$WinRELocation = $FinalWinREStatus[1]
if (!$WinREStatus)
{
	LogMessage("Warning: WinRE Disabled")
}
$WinRELocationItems = $WinRELocation.Split('\\')
foreach ($item in $WinRELocationItems)
{
	if ($item -like "partition*")
	{
		$WinREPartitionIndex = ExtractNumbers($item)
	}
}
LogMessage("WinRE Partition Index: " + $WinREPartitionIndex)
$WinREPartition = Get-Partition -DiskNumber $OSDiskIndex -PartitionNumber $WinREPartitionIndex
$WinREPartitionSizeInfoAfter = DisplayPartitionInfo($WinREPartition.AccessPaths)
LogMessage("")
LogMessage("OS Information:")
$OSPartition = Get-Partition -DriveLetter $OSDrive
LogMessage("OS partition size: " + $OSPartition.Size)
LogMessage("OS partition Offset: " + $OSPartition.Offset)
if (!($WinREPartitionIndex -eq $newPartitionIndex))
{
	LogMessage("Warning: WinRE is installed to partition [" + $WinREPartitionIndex +"], but the newly created Recovery partition is [" + $newPartitionIndex + "]")
}
LogMessage("End time: $([DateTime]::Now)")
if ($NeedBackup)
{
	LogMessage("")
	LogMessage("The contents of the old WinRE partition has been backed up to [" + $BackupFolder + "]")
}
LogMessage("")
LogMessage("Successfully completed the operation")

Un commentaire sur "Résolution de l'erreur Windows Update 0X80070463"

Commenter